Powder containment bench booths are used for spraying powder and/or grinding non-metallic (fiberglass, etc,)on smaller items. This equipment is for low volume usage. Exhaust air can be recirculated back into the factory, thereby eliminating the need for roof penetration and/or air replacement. Because of environmental restrictions, this type of booth has become a very popular alternative to inexpensively enter into the powder coating industry.

All Powder Containment Bench Booths adhere to the Uniform Fire Code and the National Electrical Code.  Always check local fire and electrical codes for special conditions that may prevail in your area.

We carry the best of Powder Coating Equipment. We have powder coating systems at unbeatable prices for our customers. Our powder guns come with full manufacturer's warranty and will meet all your powder coating needs. Our Powder Booths make efficient use of shop space and are designed for manual “batch” or automated/process powder coating with or without over spray reclamation.

Shop air is drawn into the spray booth, and then passes through the booth’s work space into a filtered plenum integrated into the wall(s). The air is filtered in multiple stages and then discharged to the outside atmosphere or routed back into the room. Disposable filters are easy to inspect and replace. Optional reclaim systems are available. Intelligent design allows for installation with limited overhead clearance. First set of filters is provided with each booth.

All Powder Coating Bench Booths adhere to the Uniform Fire Code and the National Electrical Code.  Always check local fire and electrical codes for special conditions that may prevail in your area.

Open-Type (O. T.) Fluorescent Light Fixtures as listed are U.L. and C-U.L. approved, 4’ long, 4-tubes.

Vapor-Tight (V.T.) Fluorescent fixtures as listed are U.L. and C-U.L. approved, 4’ long, 4 tubes, Adhering to Hazardous Area Class 1, Division 2 from the National Electrical Code.

All Light Fixtures are placed on the outside of 1/4” Clear Tempered Glass,  gasketed and locked in place in the working depth of the booth.

Fan Motors Are 3-phase 208/230/460 volt, 60 Hz.

Light Fixtures are 120 volt.

Solenoid Valve is single phase.  Voltage must be started (110/220 etc.).

Pressure switches installed as per Instructions

Fans, Motors, Filters, Etc., are packaged but loose.

Shipment by Public Carrier has special requirements.  Contact Factory or Dealer.

POWDER CONTAINMENT BOOTHS Are used for spraying powder and/or grinding non-metallic (fiberglass, etc.) items.  This equipment is for low volume usage.  Exhaust air can be recirculated back into the factory, thereby eliminating the need for roof penetration and/or air replacement.  Because of environmental restrictions, this type of booths has become a very popular alternative to inexpensively enter into the powder coating industry.

Additional Features Available:

• Conveyor openings
• Explosion-proof motors
• Working depth extensions
• Special width or height requirements
• Special lighting arrangements
• Contact factory or dealer for price adjustment

Includes:

• Fan & Motor
• Pre-Filters
• Pocket Filters
• Final Filters (95% Ashrea Test)
• Solenoid Valve
• Nuts & Bolts
• Manometers
• Pressure Switch
• Light Fixtures (less tubes)
• Unit Will ship assembled
  

Notes:

Powder Containment Booths are NOT to be used for wet painting or blasting.
Booth dimensions and price are subject to change without notice

Also Available Upon Request:

    - Mechanical Installation

    - Electrical Installation

    - Permit Processing

Ships by truck freight.  Forklift is required at site to unload equipment. You will be contacted with actual shipping & ADDITIONAL OPTIONS charges before your order is processed.

Download Our Powder Coating Bench Booth Specs And More Options Catalog Here

Click Here To Request A Quote for Installation and/or Permit Processing